Weekly Tooling/Metalworking Auction 10/12/16

Kennametal Monarch Size 45 Shank Screw Fit Holder P/N- MMBHA-45-TBH

Bilz MSB 1/3/4" Quick Change Tap Adapter Opening for Tap Adapter: 11/16" Across, Key Ways: 3/8", Approx 1.5" Deep Locks an...

Smith Tool Compression Tap Adapter Holders M/N:TMS/LCTH 322-1-217-T& C M/N:TMS/LCTH 322-1-217FT Opening for Tap Adapter: 1 3/16" Acr...

Bilz MSB 2/1.1/16" Quick Change Tap Adapters Opening for Tap Adapter: 15/16" Across, Key Ways: 9/16"", Approx 2" Deep ...

Smith Tool Quick Change Tap Adapter Extension P/N- TMS-EXT 401-001, 1000 Has 5/16 stamped into top

Schunk HSK C50 Hydraulic Expansion End Mill Holders, 16mm P/N- 0204015, 16mm Shank Type: HSK-C Size 50 Quantity Bid: Amount x 5 = Total

Bilz Quick Change Chuck w/ HSK-C40 Shank Tap Adapter Hole: 3/4" Wide, 7/16" Key Ways M/N:WFLC 115-0-IK/HSK-C40

Guhring 14mm HSK 63A Hydraulic End Mill Holder Code No.:4366 14.063

Sandvik HSK 63A 20mm End Mill Holder M/N:Cannot read full #

Mapal HSK 63A Diameter Finish Bore Reamer M/N:9-27915-81506 REV.1 Diameter:18.921

Komet A33 12130? ER20 Collet Chuck, ABS32 Mount P/N- A33 12??? (Cannot read the "???" on unit, found matching one online with P/N- A33 ...

Dial Indicator With Stand, 30mm Range

SICK Light Curtains, Emitter and Sensing Device Type:FGSS 600-211 Type:FGSE 600-211

Pneumatic Linear Sliding Actuator No MFG ~19.5" Range

Seing Trochoid Pump Type:TEEP Output:1/4HP Volts:220/380 See pic for more info

Garr Tool Square End 1/2" Solid Carbide End Mills Used Quantity Bid: 7 X Amount = Total

Garr Tool Ball Nose 1/2" Solid Carbide End Mills Used Quantity Bid: 5 X Amount = Total

Garr Tool Ball Nose 1/2" Solid Carbide End Mills, Dull Very Dull Units Quantity Bid: Amount x 6 = Total

Garr Tool Square End 1/2" Solid Carbide End Mills, Dull Very Dull Units Quantity Bid: Amount x 6 = Total

Garr Tool Ball Nose 3/8" Solid Carbide End Mills Used Quantity Bid: Amount x 6 = Total

Garr Tool Ball Nose 3/8" Solid Carbide End Mills, Dull Very Dull Units Quantity Bid: Amount x 6 = Total

Garr Tool Solid Carbide End Mills, 1/4"-5/16" Dull Very Dull Units

Garr Tool Ball Nose 5/16" Solid Carbide End Mills Used Quantity Bid: Amount x 8

Garr Tool Ball Nose 5/16" Solid Carbide End Mills Used Quantity Bid: Amount x 7 = Total

Garr Tool Ball Nose 1/4" Solid Carbide End Mills Used Quantity Bid: Amount x 8 = Total

Garr Tool Ball Nose 1/4" Solid Carbide End Mills Used **Selling as 2 for 1 because they are very dull** 10 units total Quantity Bid: ...

Unused, 1/2" 3FL Solid Carbide End Mill **Believed to be unused, no case came with cutter. Do not see any chips or set screw marks on unit**

Niagara 1" x 1" x 2.5" x 5" 4FL Solid Carbide End Mill #- 85708 **Has a few very tiny marks in cutter**

New SGS Ser 1ELB 1/2" End Mill, Weldon Flat 1/2" x 1/2" x 3" x 6"

Unused Carbide .175 Radius Bead Cutter, 3/4" Shank

Mapal Solid Carbide Coolant Through, Counter Bore? Number on cutter: 1229612, 30188632/183022 Shank- 1/2" Needs resharpening

Komet/Mapal Carbide Coolant Thru SP Form Groove Mills Mapal:11178648-10/5 Add#:1960185 REP 114103-REV.01 Komet:494.10.4005 Quantity Bid: 2 X

New Rougher End Mills, Misc Sizes, 7 Total

Lot of Misc Sized Rougher End Mills, Used

1.5" and 2" Rougher End Mills, 1.25" Shank (1) Niagara 44591, 2", Lead: 10.882 I7 (1) 1.5 HSSCO 89302, Lead: 8162

Kennametal 1" Lathe Tool Holder, DVJNR-163D NF6

US Tool Grooving Tool Holder Tool#:EPT-298101 1" x 3/4" Shank

1" Pentagon Shank Indexable Tool Holders #:T-50016 #(2):8627440-T-18 2 Have no Info Quantity Bid: 5 X Amount = Total

1" Pentagon Shank Indexable Tool Holders #:8627440-T115 Quantity Bi Amount x 5 = Total

1" Shank Indexable Boring Bar M/N:SF 25 4 MTNL 16 Overall Length: 12"

APT 1" Shank Indexable Boring Bar M/N:LE17L Overall Length: 12"

Kennametal Indexable Coolant Thru Boring Bar M/N:A12-SCFPL3 3/4" Shank

Kennametal 2" x 14" Boring Bar, B2616 INS.- N-4L 1DL82 **Missing insert Hold down clamp/screw**

TG100 Collet Spindle Units for Milling Overall: 12.5" x 4" x 3.5" Unsure of Shank Type, 2" Width, 4" Length (Includin...

1/2" Cap End Mill Holder Spindle Unit for Milling Overall: 10.5" x 4" x 3.5" Unsure of Shank Type, 2" Width, 4" ...

DA400 Collet, Right Angle Spindle Unit for Milling Overall: 7.5" x 4" x 9.25" Unsure of Shank Type, 2" Width, 4" Leng...

DA400 Collet, Right Angle Spindle Unit for Milling Overall: 7.5" x 4" x 9.25" Unsure of Shank Type, 2" Width, 4" Leng...

Right Angle Collet Chuck Spindle Unit for Milling **MISSING DRIVE GEAR!!** **UNSURE OF COLLET TYPE THIS UNIT USES** **Has two notches where colle

Spindle Unit for Milling, No Head **Does not spin by hand** Overall: 4" x 3.5" x 6.5" Unsure of Shank Type, 2" Width, 4...

2" Capacity Tool Holders with size VDI50 Shank http://www.tools-n-gizmos.com/specs/Tapers.html#NMTB Scroll Down to VDI Shanks and referen...